An introduction to my business - Creative Metals

[jotto]

My latest acquisition for the shop - a nice big rig for disks, drums and flywheel skimming. Also have a plasma cutting table 2mx3m on the way once I can find a transport company to deliver the damn thing.

Sent from my PRA-LA1 using Tapatalk

[Bugger]

Geluk en sterkte
Post pics van jou out of Africa projects
Ons hi van pics

[jotto]

Geluk en sterkte
Post pics van jou out of Africa projects
Ons hi van pics

So iets? Had to fix the tractor trailer that came apart due to loading a whole bloody ellie on it [emoji3]
Bush mechanics special.... Had to scrounge and use what was available. One Land-rover bumper got cut up for support pieces, no mercy.

Sent from my PRA-LA1 using Tapatalk

[Ricof4e]

Goeie werk.

Maar ek dink nie daai wa gaan ooit weer dieselfde gewig dra as tevore nie (niks agv jou werk nie) maar daai chassis se staal het klaar gerek en gebuig.

[jotto]

Snaaks genoeg is die chassis actually nog in goeie toestand, dit was die cross-members wat gedaan was. Maar nou sal hy sommer 2 olifante kan dra man

[Crips]

Hi Jotto,

Hoe gaan dit met die luggage trailer wat jy sou begin het in Julie?
Wil ook weet of jy dalk kan help vir die kole tray onder in my ingeboude braai?

[jotto]

Hallo Chris

Ek het begin, en toe sak die werk op my af, ek kom nie voor nie. Ek is nou besig met n offroad camper trailer vir 'n klient. Ook n paar bike trailers gebou intussen. Ek is so besig ek kom glad nie by my eie produkte uit nie. Het darem gister 'n nuwe fabricator/welder aangestel wat dinge weer op datum sal bring, dan begin ek met erns weer.

'n Kole laai is maklik, ek bou nogal baie uit stainless op die oomblik vir gas braaie (spoeg)

Ek moet eintlik fotos laai, maar meeste is op facebook.

[jotto]

Built a stainless steel 304 braai grid that swings out. Came out really nice.

And a stainless stand for this fire drum. The stand fits into the drum when packed up.

Here is a "Merican" smoker in the making

[jotto]

A small brass hammer to moer things with in the shop

Bakkie working hard to cart 2t up the Ceres mountain

Brake disk skimming hard at work

Fabrication table for a boat shop

Some gates finished recently

Shop is too small for this 6.2m 400kg gate - and there is only two of us...

[Mike Nel]

Bly dit gaan goed met jou besigheid

[Rabbiddog RIP 7/6/21]

When I get a chance, I will measure and send you the dimensions for an roof top Aluminium box I want made and brackets and support for a 360 Awning for my D3.

I have been playing around with ideas and there is not one on the market for an Expedition roof rack that suites my needs. I want to move my recovery gear, tools onto the roof rack without compromising on height and is lockable and water proof.

[jotto]

When I get a chance, I will measure and send you the dimensions for an roof top Aluminium box I want made and brackets and support for a 360 Awning for my D3.

I have been playing around with ideas and there is not one on the market for an Expedition roof rack that suites my needs. I want to move my recovery gear, tools onto the roof rack without compromising on height and is lockable and water proof.

Cool, sounds interesting.

[jotto]

Built this custom trailer for a rental company - a Alucab Kaya camper slides on the back, making it a fully fitted camper unit.

[Mad Manny]

Nice!

[Ricof4e]

Well done