Page 1 of 2

pressurizing canopy diy

Posted: Tue Mar 05, 2024 2:22 pm
by Jadranko
part is made out of solid glass filled nylon which is not a best material for a job.
ill call it sample prototype.
ill try and explain it.

air and water enter trough fins and hit a wall.
water is forced down while air goes up.

Re: pressurizing canopy diy

Posted: Tue Mar 05, 2024 2:23 pm
by Jadranko
water is forced out trough holes at a bottom

Re: pressurizing canopy diy

Posted: Tue Mar 05, 2024 2:27 pm
by Jadranko
this is how it suppose to be mounted on a side of a canopy

Re: pressurizing canopy diy

Posted: Tue Mar 05, 2024 2:29 pm
by Jadranko
last two photos show approximate air inlet hole position on a canopy side wall

Re: pressurizing canopy diy

Posted: Tue Mar 05, 2024 2:32 pm
by Jadranko
this should be permanent fixture as its not necessary to open or close anything as on other-ones on the market.

Re: pressurizing canopy diy

Posted: Tue Mar 05, 2024 3:06 pm
by HenriSteyn
Very interesting!

Give regular feedback please?

Re: pressurizing canopy diy

Posted: Tue Mar 05, 2024 3:19 pm
by Jadranko
it will take time,which i do not have,but feed back will be here as soon there is any.

Re: pressurizing canopy diy

Posted: Tue Mar 05, 2024 5:35 pm
by Paul#25
Is this something that you have designed Joe?
It's an interesting idea. 🤔

Re: pressurizing canopy diy

Posted: Wed Mar 06, 2024 7:31 am
by Jadranko
im just playing/working on it Paul and im sure no one can come up with anything new regarding vents. :)
idea was there after watching how the sailing boat vents work.
this is printed version of left hand one.
it feels strong.

file ill upload soon

Re: pressurizing canopy diy

Posted: Wed Mar 06, 2024 8:02 am
by Jadranko
inside are parts:
33mm high
45mm high and
33 to fit top of a canopy.

Re: pressurizing canopy diy

Posted: Wed Mar 06, 2024 5:24 pm
by Leon
joe wrote: ↑
Tue Mar 05, 2024 2:32 pm
this should be permanent fixture as its not necessary to open or close anything as on other-ones on the market.
Joe , kan die air in take toe maak as jy agter iemand op n grond pad ry wat baie stof maak
As nie gaan jy baie stof in kry deur die air in take mos.

Re: pressurizing canopy diy

Posted: Wed Mar 06, 2024 7:59 pm
by Mad Manny
Leon wrote: ↑
Wed Mar 06, 2024 5:24 pm
Joe , kan die air in take toe maak as jy agter iemand op n grond pad ry wat baie stof maak
As nie gaan jy baie stof in kry deur die air in take mos.
Jadranko, my Slavic friend, I will translate what Leon asked

He wants to know if you can close it. Because, if you are driving behind another vehicle on a dusty road, that vent will let a lot of dust in....

Re: pressurizing canopy diy

Posted: Wed Mar 06, 2024 9:59 pm
by Leon
Mad Manny wrote: ↑
Wed Mar 06, 2024 7:59 pm
Leon wrote: ↑
Wed Mar 06, 2024 5:24 pm
Joe , kan die air in take toe maak as jy agter iemand op n grond pad ry wat baie stof maak
As nie gaan jy baie stof in kry deur die air in take mos.
Jadranko, my Slavic friend, I will translate what Leon asked

He wants to know if you can close it. Because, if you are driving behind another vehicle on a dusty road, that vent will let a lot of dust in....
Dankie Manny :lol:

Re: pressurizing canopy diy

Posted: Thu Mar 07, 2024 7:49 am
by Jadranko
thanks Manny.

good question and thanks for asking it Leon,as i never thought about that problem. :(
for my defense i did get idea from sailing boat and they don't deal with dust. :D


some cheap pvc fittings that will fit in to hole drilled on canopy wall and this comes to mind.

https://www.builders.co.za/Safety-and-P ... 0000570273


ill work on it....

Re: pressurizing canopy diy

Posted: Thu Mar 07, 2024 4:02 pm
by Mad Manny
Joe, I think you should change your Forum name.
Something like Jadranko, or The Slav, or The Crazy Croat....