Re: Modifying a spare wheel swingarm.
Posted: Tue Mar 02, 2021 7:52 pm
good work Paul
4x4 Action Group
For the Off Road User & Outdoor Enthusiast!
https://www.4x4ag.co.za/forum/
Modifying a spare wheel swingarm.
Page 3 of 3
Re: Modifying a spare wheel swingarm.
Posted: Tue Mar 02, 2021 7:56 pm
If anyone needs powder coating done, I've found a good place close to me. Price and quality are excellent.
Re: Modifying a spare wheel swingarm.
Posted: Fri Mar 05, 2021 4:13 pm
I got the basket back from powder coating today. I'm very happy with the finish and look.
Peter, I had a look at the carrier's for up to three Jerry Cans and the bracing they have. What I came up with should be as strong as the other designs I have seen. The weight of the basket is taken by both the square tube at the top and the lower bracket that bolts directly to the arm.
There is an additional bolt that goes into the top part of the bracket.
Peter, I had a look at the carrier's for up to three Jerry Cans and the bracing they have. What I came up with should be as strong as the other designs I have seen. The weight of the basket is taken by both the square tube at the top and the lower bracket that bolts directly to the arm.
Re: Modifying a spare wheel swingarm.
Posted: Fri Mar 05, 2021 6:04 pm
Re: Modifying a spare wheel swingarm.
Posted: Fri Mar 05, 2021 7:07 pm
In Fountain Road Woolf. There is a sand blasting place in Plantation Road but I haven't used them.
Re: Modifying a spare wheel swingarm.
Posted: Fri Mar 05, 2021 9:25 pm
Thanks
Have used Tone Blast. Very good. Don't think they like small jobs though
Have used Tone Blast. Very good. Don't think they like small jobs though
Re: Modifying a spare wheel swingarm.
Posted: Mon Mar 08, 2021 2:13 pm
It's all assembled and ready for collection by the customer. I'm very happy with the way it came out with the power coating.
Re: Modifying a spare wheel swingarm.
Posted: Mon Mar 08, 2021 5:40 pm
Powder CoatingPaul#25 wrote:It's all assembled and ready for collection by the customer. I'm very happy with the way it came out with the power coating.
Powder Coating.
Powder FFS.
Powder!!!
Re: Modifying a spare wheel swingarm.
Posted: Tue Mar 09, 2021 10:21 am
Re: Modifying a spare wheel swingarm.
Posted: Tue Mar 09, 2021 4:13 pm
Sent from my iPhone using Tapatalk
Re: Modifying a spare wheel swingarm.
Posted: Tue Mar 09, 2021 4:16 pm
Re: Modifying a spare wheel swingarm.
Posted: Sun Mar 14, 2021 6:11 pm
Re: Modifying a spare wheel swingarm.
Posted: Tue Mar 16, 2021 5:26 pm
Phil came to collect the basket today. We fitted the arm to the bumper and I was pleased to see that the outer edge of the cage doesn't cover the right tail light. He's very happy so hopefully I'll get some repeat business.
Re: Modifying a spare wheel swingarm.
Posted: Tue Mar 16, 2021 6:15 pm
Thursday February 25th to Tuesday March 16th...
In that time Toyota produced 360 000 new vehicles worldwide.
In that time Toyota produced 360 000 new vehicles worldwide.
Re: Modifying a spare wheel swingarm.
Posted: Tue Mar 16, 2021 7:51 pm
It's waited over a week for collection as the customer was away in Kruger Park. No I didn't charge him extra for storage.
It's hand crafted so that takes a bit longer than the production line sausage machine from Toyota and such.
It's hand crafted so that takes a bit longer than the production line sausage machine from Toyota and such.