4x4 Action Group

I've been doing some light fabrication projects during the lock down. This is an ongoing new line for me due to the uncertainty with my current employer. I'm specialising in smaller one off jobs that the big guys don't want to do.
I've done a frame for a stowage replacing the rear seat on a Land Cruiser, a odd size roof rack for a Toyota HiLux and some other brackets and fittings for an offroad trailer. Other than the vehicle side I'm also doing security gates and steel work for around the home.

Vdubtech onsite upholster also do custom covers in Any materials
And custom interior work
0118222799
Info@vdubtech.co.za

Special wheel covers with dedicated Pockets for Specific items
Situated in PRIMROSE

Also a fully Equipped mechanical workshop to sort mechanical problems in the East Rand



Sent from my SM-G965F using Tapatalk

Paul#25 introduced me to the 4x4 group.

In the mid to late 90's I did plenty 4x4 driving.

Then it was Paul#25 racing that kept me busy on weekends. Pit crew and photographer after the build of the Lotus 7.

My landy only goes where there's no traction control or diff-locks needed.

Am looking to fit a diff-loc or 2 in the future...finances permitted.

If you need wire coil springs made up to spec I can recommend Starco

http://www.starco.co.za/

I needed a one off spring made up... done in two days

Not vehicle related, but camping related, but have to give a big shoutout to Carma-quip (Self inflating mattress ) ! Bought my first one about 3years ago. Then 3 more inbetween. One felt ‘softer’ after some time and I sent it back to Marius at Carma-Quip. No questions asked, said I have to send it back, he had a look, agreed, and replaced the ‘inner’ without question or cost involved. Prime service!

I’ll show you at platbank, it physically cannot leak!, it’s a special kind of eggshell matress. Nie n afblaas matrass nie! No air needed. Basically it uses air to expand the sponge! Seems you are new to camping Manny.

http://www.carmaquip.co.za/Carma_Quip_- ... ating.html

I know what is going to come my way now but.........

I'm looking for a decent Jeep workshop/mechanic in the Gauteng area. American SUV need not be mentioned.

Mad Manny wrote: ↑

Tue Sep 19, 2023 9:35 am

Is Bulli still open?

Andre ran away and dropped all his customers in the shyte. Somewhere in the Eastern Cape now, I hear.

Lots of guys very upset.

jakeslouw wrote: ↑

Tue Sep 19, 2023 8:43 am

I know what is going to come my way now but.........

I'm looking for a decent Jeep workshop/mechanic in the Gauteng area. American SUV need not be mentioned.

I don't know if this guy is still around. He was able to sort out stuff on the XJ that nobody else could.

Treson Naidoo - 082 555 8408

Steel Suppliers.
If anyone needs steel but doesn't want to buy full 6m lengths, Metal Centre in Selby sell pieces cut to length.
Tel: 011 493 4930. Address: 18 John Street Selby

Paul#25 wrote: ↑

Thu Sep 21, 2023 4:34 pm

Steel Suppliers.
If anyone needs steel but doesn't want to buy full 6m lengths, Metal Centre in Selby sell pieces cut to length.
Tel: 011 493 4930. Address: 18 John Street Selby

Thanks, but if I had to drive to Selby I'd have used enough petrol to buy 2 extra 6m lengths AND get hijacked.